This proprietary
& fully patented "monopole
& single focus" technology allows the MAGNETIZER
without any external energy source or cutting of the pipes, to use its
power from only one of its poles (unlike
bi-polar systems which are inefficient) for proper treatment of all
kinds of fluids (fuels, air, water, beverages), since there are
currently about 40 (forty) energizers of various types for specific
applications. No other manufacturer in the world does that! After millions
of dollars invested during a decade of research and worldwide testing
(in different climactic and geographical conditions) the MAGNETIZER
patented technology has harnessed the strongest permanent
magnets that are scientifically and technically possible to design and
manufacture in the world today in order to guarantee the optimum performance.
Thanks to millions
of dollars invested during the past decade on tests and research worldwide
(in different climactic and geographical conditions) the patented MAGNETIZER
technology
takes advantage of the
best available
from the scientific and technical point of view,
ceramic, berrite-ferrite, permanent magnets
of the aero-space industry grade, supported by the Certificate
ISO 9002, in order to guarantee the optimal
working.
As opposed to other in-line
(retrofit, "wet") devices with traditional design of magnets,
the MAGNETIZER-s do not get in contact
with the activated fluid, since they are snapped on the outside pipe
surfaces. That's why their installation is simple and fast, without
the need of tools or any type of maintenance. They have a compact construction
with very small weight (important e.g. while fitting irrigation drip
pipes, fuel lines of vehicles, etc.). During independent (third party)
parallel testing all those other devices claiming to bring considerable
savings have shown not more than 50% of those brought by the MAGNETIZER,
mostly due to their design flaw (bi-polarity)
that lets N and S pole cancel each other's action, since the magnetic
fields (like their electric counterpart, electricity) always choose
the path of least resistance, being the path of least effect, since
with bipolar devices most of the magnetic forces are merely being transmittedbetween
the two poles. Not only are many of these devices badly designed, have
cancelled out or "short circuited" magnetic fields, but also
have very weak magnets. The MAGNETIZER's
patented "monopole" design has surpassed the flux field (power
density) of the bi-polar technology by as much as 500 times! This is
of supreme importance, since it is required to have the necessary power
(flux density) to properly excite the electron activity causing the
increased oxidation effect. And this is why other systems cannot show
sufficient and consistently satisfying results.
The illustration below presents
the traditional bi-polar designs (four upper ones) vs. a monopole system
by P. Kulish (1984).